RAX721-C Series

With the constantly rising of user bandwidth, operators also put forward higher demands for the port bandwidth and performance of aggregator. Raisecom RAX721-C series are next-generation carrier-class pre-aggregation and aggregation products that provide high performance, high reliability and high densities 1GE, 10GE, 25GE, 40GE and 100GE port types in a compact standard 1U enclosure, flexibly adapting to diversified operator’s network bandwidth requirements. They support rich Layer 2 and Layer 3 features, with advanced QoS features, customers' services at different levels can be flexibly and finely scheduled, and support various VPN services over IP/MPLS networks, to implement services isolation through network virtualization, greatly improved network capacity and utilization, and help customers build a powerful next-generation packet transport network.

Application >>

Metro Ethernet Pre-aggregation and Aggregation

RAX721-C series working with Raisecom intelligent CPE RAX711 series can deliver high-capacity 1GE/10GE/40GE/100GE diversified metro ethernet pre-aggregation and aggregation. support complete standard CE2.0 E-Line, E-LAN, E-Tree and EAccess services, as well as VPWS, VPLS, H-VPLS, MS-PW, and BGP L3VPN services over MPLS, 6PE, 6VPE over MPLS, EVPN* over SR MPLS and EVPN* over SRv6* as a PE device. The service delivery can be very flexible and reliable. ZTP and hardwarebased CFM and SLA offer service providers an easier way to deploy and manage either devices or services. Various fault detection and protection mechanisms guarantee high availability and stability of services. The whole solution is simply and completely managed on brand new B/S structured RCView system.

Highlights >>

Power Reliability	Dual hot-swappable power supplies with voltage/temperature monitoring
Flexible Service Delivery	Standard CE2.0 service (E-Line, E-LAN, E-Tree, E-Access) delivery VPWS, VPLS, H-VPLS, MS-PW, L3VPN, 6PE/6VPE over MPLS EVPN over MPLS/SR on roadmap* Flexible traffic classification guarantees customer-defined service SLA
Multicast	Full set of multicast routing and control protocols implemented for flexible multiple service access and aggregation
Committed Network Resiliency	Protection mechanism including STP/RSTP/MSTP, switchport backup, IEEE802. lax Link Aggregation, MC-LAG, ITU-T G.8032 ERPS, Static/dynamic IP FRR, TE/LDP/VPN/EVPN* FRR, VRRP, MPLS PW redundancy, MPLS TE hot-standby* guarantee network resiliency in chain, star, mesh, dual-homing and ring topologies
OAM & Hardware-based SLA	Hardware-based IEEE802. 1ag/ITU-TY.1731 end-to-end CFM (CCM interval 3.3ms), hardware-based ITU-T Y.1731 end- to-end SLA performance monitoring with test result showing on user-friendly GUI BFD helps customer achieve fast fault detection for dynamic IP services and MPLS services
IPv4/v6 Dual-Stack	IPv6 for management and services 6PE/6VPE support helps customers plan their future network evolution

Key Features >>

Ethernet Service	MAC addresses
	Jumbo frame up to 12288 Bytes
	4,094 VLANs, IEEE802.1Q, IEEE802.1P, IEEE802.1ad QinQ
	Layer 2 control protocol (L2CP) handling
	Super VLANs
	Private VLAN (PVLAN) with primary, community and isolated type
IP Service	IPv4/v6 static routing
	RIPv1/v2/ng, OSPFv2/v3, ISISv4/v6 and BGP4/4+
	SR-MPLS
	PMTU IPv4/v6
	VRF Lite IPv4/v6
	DHCPv4/v6* server, client, relay, snooping

MPLS Service	MPLS L2VPN: VPWS, VPLS, H-VPLS, MS-PW
	MPLS L3VPN
	MPLS EVPN*
	6PE/6VPE
	Inter-AS MPLS L2VPN Option A, C
	Inter-AS MPLS L3VPN Option A, C
	Static CR-LSP, LDP, CSPF, RSVP-TE, tunnel policy
Multicast	IGMP v1, v2, v3
	IGMP Snooping, MVR, VLAN copy, Proxy
	MLD v1, v2*
	MLD Snooping*
	PIM-SM and PIM-SSM IPv4/v6*
	NG-MVPN
QoS	Flexible Traffic classification base on MAC, IP, Port, VLAN, CoS, DSCP, etc.
	Traffic policing
	Hierarchical CAR
	H-QoS*
	8 local priority, 8 queues per port
	WRED
	Traffic shaping per queue/port
	SP/WRR/SP+WRR queue scheduling
	3-level H-QoS
Reliability	NSF
	IEEE802.1ax Link aggregation group, manual, LACP
	Muti-chassis LAG*
	Switchport backup
	STP, RSTP, MSTP, MRSTP
	ITU-T G.8032 ERPS based on port or CFM, switchover time less than 50ms
	Loop detection
	Ethernet fault propagation, MPLS PW fault propagation
	ULDP
	IPv4/v6 ECMP
	Static/dynamic IPv4/v6 FRR, TE/LDP/VPN FRR
	VRRP
	MPLS PW redundancy, MPLS TE hot-standby*
OAM	IEEE 802.3ah EFM-OAM
	IEEE 802.1ag/ITU-T Y.1731 CFM
	ITU-T Y.1731 performance monitoring (LM, DM) for Ethernet and MPLS L2VPN

MPLS Service	MPLS L2VPN: VPWS, VPLS, H-VPLS, MS-PW
	MPLS L3VPN
	MPLS EVPN*
	6PE/6VPE
	Inter-AS MPLS L2VPN Option A, C
	Inter-AS MPLS L3VPN Option A, C
	Static CR-LSP, LDP, CSPF, RSVP-TE, tunnel policy
Multicast	IGMP v1, v2, v3
	IGMP Snooping, MVR, VLAN copy, Proxy
	MLD v1, v2*
	MLD Snooping*
	PIM-SM and PIM-SSM IPv4/v6*
	NG-MVPN
QoS	Flexible Traffic classification base on MAC, IP, Port, VLAN, CoS, DSCP, etc.
	Traffic policing
	Hierarchical CAR
	H-QoS*
	8 local priority, 8 queues per port
	WRED
	Traffic shaping per queue/port
	SP/WRR/SP+WRR queue scheduling
	3-level H-QoS
Reliability	NSF
	IEEE802.1ax Link aggregation group, manual, LACP
	Muti-chassis LAG*
	Switchport backup
	STP, RSTP, MSTP, MRSTP
	ITU-T G.8032 ERPS based on port or CFM, switchover time less than 50ms
	Loop detection
	Ethernet fault propagation, MPLS PW fault propagation
	ULDP
	IPv4/v6 ECMP
	Static/dynamic IPv4/v6 FRR, TE/LDP/VPN FRR
	VRRP
	MPLS PW redundancy, MPLS TE hot-standby*
OAM	IEEE 802.3ah EFM-OAM
	IEEE 802.1ag/ITU-T Y.1731 CFM
	ITU-T Y.1731 performance monitoring (LM, DM) for Ethernet and MPLS L2VPN
	TWAMP-Lite for Ethernet, IP, MPLS L3VPN, 6PE/6VPE*
	SAT: RFC2544, Y.1564
	Layer 2 loopback with MAC swap
	MPLS ping and traceroute
	VCCV ping and traceroute
	BFD for interface, static routing, RIP, OSPF, ISIS, BGP, LDP, LSP, CR-LSP, PW, MS-PW, VRRP, FRR, PIM*
	Dying Gasp in case of power failure
Security	CPU CAR
	CPU anti-attack
	DHCPv4/v6 Snooping
	ARP filter, DAI
	IPv4/v6* IPSG
	DOT1X
	ACL based on VLAN, CoS, MAC, EtherType, IP or user-define
	RADIUS, TACACS+
	Storm control (broadcast, multicast, DLF)
	Port-security MAC
Maintenance and Managemen	Zero-Touch Provisioning
	SNMP v1/v2/v3
	Netconf, Telemetry*
	CLI management by local CONSOLE, Telnet and SSHv2
	KeepAlive, RMON, LLDP, Syslog
	SFP digital diagnostic management (DDM)
	CPU, memory monitoring
	Voltage and temperature monitoring
Synchronization	NTP, SNTP
	IEEE1588v2 TC*
	Sync E

Model Comparison >>

Model	RAX721-C-2C24	RAX721-C-6C48
Switching capacity	640Gbps	2.88Tbps
Interface	2x 100G/40G QSFP28/QSFP+	6x 100G/40G QSFP28/QSFP+

24 X 10G/1G/100M SFP+/SFP	48 X 10G/1G SFP+/SFP
Power Supplies	2 hot-swappable AC/DC power supplies provide 1+1 redundancy AC:220V, 100~240VAC DC: -48V, -36~-72V	2 hot-swappable AC/DC power supplies provide 1+1 redundancy AC:220V, 100~240VAC DC: -48V, -36~-72V
Power consumption	73W	347.8W
Operating Temperature (Below altitude 1800m)	-5~55°C*	-10~55°C*
Humidity	10~90% non-condensing	10~90% non-condensing
Physical Specification	1RU 444(W)mm X 360(D)mmx44(H)mm Weight: 4.47kg	1RU 440(W)mm X 360(D)mmx44(H)mm Weight: 7.68kg

Compliances >>

Standards & Protocols
	CE, UL, FCC compliance
	EMC Class A
	RoHS compliance
	IEEE802.3, 802.3u, 802.3z, 802.3-2008
	IEEE802.1AB, 802.1D, 802.1Q, 802.1p, 802.1ad, 802.1ax,
	IEEE802.3ah, 802.1ag,
	IEEE1588v2
	ITU-T G.8031, G.8032, ITU-T Y.1731
	MEF CE2.0 Compliance, MEF6, 9, 10, 11, 13, 14, 16, 17, 20, 31, 36
	RFC826, 768, 792, 793, 1112, 1195, 1771, 1772, 1997, 2131, 2132, 2236, 2328, 2362, 2439, 2710, 2763, 2966, 3031,
	3032, 3034, 3035, 3036, 3037, 3046, 3065, 3101, 3107, 3137, 3209, 3277, 3315, 3376, 3473, 3567, 3618, 3623, 3630,
	4090, 4182, 4271, 4273, 4377, 4378, 4379, 4443, 4447, 4448, 4541, 4605, 4649, 4760, 4761, 4762, 4893, 5036, 5187,
	5286, 5357, 5462, 5575, 5659, 5883, 6511, 7130

Ordering Information >>

Equipment

Standards & Protocols
	CE, UL, FCC compliance
	EMC Class A
	RoHS compliance
	IEEE802.3, 802.3u, 802.3z, 802.3-2008
	IEEE802.1AB, 802.1D, 802.1Q, 802.1p, 802.1ad, 802.1ax,
	IEEE802.3ah, 802.1ag,
	IEEE1588v2
	ITU-T G.8031, G.8032, ITU-T Y.1731
	MEF CE2.0 Compliance, MEF6, 9, 10, 11, 13, 14, 16, 17, 20, 31, 36
	RFC826, 768, 792, 793, 1112, 1195, 1771, 1772, 1997, 2131, 2132, 2236, 2328, 2362, 2439, 2710, 2763, 2966, 3031,
	3032, 3034, 3035, 3036, 3037, 3046, 3065, 3101, 3107, 3137, 3209, 3277, 3315, 3376, 3473, 3567, 3618, 3623, 3630,
	4090, 4182, 4271, 4273, 4377, 4378, 4379, 4443, 4447, 4448, 4541, 4605, 4649, 4760, 4761, 4762, 4893, 5036, 5187,
	5286, 5357, 5462, 5575, 5659, 5883, 6511, 7130


Part No.	Description
RAX721-C-2C24	Standard 1U, 19” standalone IP/MPLS pre-aggregation device, 2 x 100G/40G QSFP28/QSFP+ for uplink, 24 x
	10G/1G/100M SFP+/SFP for downlink, CONSOLE and SNMP ports for management
	-AC/D: dual hot-swappable AC power supply
	-AC/S: single hot-swappable AC power supply and single FANS310 module
	-DC/D: dual hot-swappable DC power supply
	-DC/S: single hot-swappable DC power supply and single FANS310 module
	-AC_DC: one hot-swappable AC power supply and one hot-swappable DC power supply
RAX721-C-6C48	Standard 1U, 19” standalone IP/MPLS pre-aggregation device, 6 x 100G/40G QSFP28/QSFP+ for uplink, 48 x 10G/1G
	SFP+/SFP for downlink, 2FANs, CONSOLE and SNMP ports for management
	-AC/D: dual hot-swappable AC power supply
	-AC/S: single hot-swappable AC power supply
	-DC/D: dual hot-swappable DC power supply
	-DC/S: single hot-swappable DC power supply
	-AC_DC: one hot-swappable AC power supply and one hot-swappable DC power supply

Power Supplies

Part No.	Description
RPA1221-S-220S12	AC power supply module for RAX721-C-2C24
RPD1241-48S12	DC power supply module for RAX721-C-2C24
PAK550-220D12+12-CRPS	AC power supply module for RAX721-C-6C48
PDK550-48D12+12-CRPS	DC power supply module for RAX721-C-6C48

Fan Module

Part No.	Description
FANS310	Fan module for RAX721-C-2C24
FANS339	Fan module for RAX721-C-6C48

Yes! I am interested